Beverly Hills is a city where a single block can hold a postwar ranch house on its original wiring, a fully renovated estate with a home theater and an EV charger, and a ground-floor commercial suite that shares a building with residential units above. The electrical work those properties generate is genuinely different from one another, even when the symptom looks the same on the surface. A tripping breaker in a 1950s home points somewhere different than one in a building that was rewired five years ago.
We handle all of it. Residential repairs, panel upgrades, dedicated circuits, rewires, and commercial electrical work across Beverly Hills and the surrounding area. Scheduling starts with a phone call, the scope gets confirmed on the call, and the price is set before anything is booked.
Call (818) 369-3955 to get started with us.
A home built before the late 1970s may still have wiring that was never designed to carry today's loads. Knob-and-tube wiring in the walls or attic, two-prong ungrounded outlets throughout, and a panel that was sized for a fraction of the circuits now running off it are all common findings in older Beverly Hills properties. None of those conditions are emergencies on their own, but each one shapes what the electrical system can safely do.
We assess what is there before recommending what to do about it. Knob-and-tube replacement, whole-home rewiring, and grounding and bonding corrections are jobs we carry out in full. Where a partial rewire is more practical than a complete one, we scope that honestly on the call and explain what each option covers.
A recently renovated home or a newer build can run into its own set of limits. A kitchen remodel that added a double oven, a wine cooler, and an induction range may have outpaced the panel. A garage converted to a home office that now runs a server rack and multiple monitors is pulling load from circuits that were never meant for it. Load calculations tell us what the panel is actually carrying and what it can support before anything new is added.
Panel upgrades and service upgrades for Beverly Hills homes come up regularly for this reason. The work involves replacing the panel, confirming the service entrance conductors match the new capacity, and in some cases upgrading the meter base at the same time. We do not recommend a panel upgrade without running the numbers first.
Getting your power back is easier than you think, and the process is the same whether the call comes in at noon on a Tuesday or at midnight on a Sunday. We are available any hour of the day, any day of the year, including weekends and holidays. Emergency calls are answered and work is scheduled as quickly as the situation allows.
For tenants and businesses that cannot shut down to accommodate electrical work, the visit is planned around what the property actually needs. Some jobs require isolating a single circuit while everything else stays live. Others require a full shutdown for a defined period. We confirm which situation applies before the visit. A property manager coordinating work across occupied units gets the same clear picture as a homeowner scheduling a panel upgrade.
Decisions about the work get made while you are on the phone. The scope is confirmed, the price is set, and the visit is booked in that same call. There is no form to fill out and no waiting for a callback.
Unpermitted electrical work, DIY repairs, and modifications done by contractors who were not focused on the electrical side are common findings in Beverly Hills properties, particularly in homes that have changed hands or been renovated multiple times. The question is always the same: what can be corrected in place, and what has to come out entirely.
The answer depends on what is there. A junction made with the wrong connectors in an accessible location can often be corrected without opening walls. Wiring that was run through a space it should not be in, or a circuit that was extended without accounting for the load, may need to be pulled and replaced from the panel forward. We trace what is there before recommending anything, and we explain the finding plainly before any work is proposed.
We tell you if a permit is needed. We name the fault plainly. You decide the fix. The specifics for a job like this are on our wiring and panel services page.
Most repairs and installations require isolating the circuit being worked on, not the whole house. Outlet replacements, switch work, ceiling fan installation, recessed and LED lighting, and adding a dedicated circuit from an existing panel all fall into this category. The rest of the property stays live while the work is done.
That matters for a Beverly Hills household where someone is working from home, or a commercial property where the rest of the building has to stay open. We confirm the scope of the shutdown on the call so nothing catches anyone off guard.
Panel replacements, service upgrades, and whole-home rewiring require turning off the main breaker for a period. How long depends on the scope of the job, and we work through that on the call before anything is scheduled. For a business or a home with equipment that cannot tolerate an unplanned outage, knowing the window in advance makes planning straightforward.
We do not leave a property without confirming every circuit is live and every connection is tested. The work is not finished until the panel cover is back on and everything has been checked.
A smart switch or dimmer installation sounds straightforward until the wiring behind the wall turns out to be two-wire without a neutral, which is common in older Beverly Hills homes. A dimmer that flickers or a smart switch that will not pair often comes down to a wiring configuration that needs to be corrected before the device will work properly. We check the box before the switch goes in.
Recessed lighting retrofits and LED conversion work often come up alongside switch replacements, and we handle both in the same visit where the scope allows.
A Level 2 EV charger requires a dedicated 240-volt circuit, and the panel has to have capacity to carry it. In a city where EV adoption is well ahead of the national average, this is one of the more common calls we take. The job involves checking the panel, running the circuit to the garage or parking area, and either installing a NEMA 14-50 outlet or hard-wiring the charger directly. If the panel is already near capacity, that conversation happens on the call before anything is scheduled.
A transfer switch isolates the home from the utility grid when the generator is running, which is what makes the installation safe and code-compliant. Without it, a generator connected directly to the home's wiring can backfeed onto the utility line. Wildfire-season public-safety power shutoffs have made backup power a practical concern across the region, and we handle the full electrical scope: the transfer switch, the generator hookup circuit, and any panel work the installation requires.
A hot tub, a workshop table saw, and a new electric range all need their own circuit. The wire gauge, the breaker rating, and the outlet or connection point have to match the equipment's requirements, and the panel has to have room for the added load. Hot tub and pool electrical work also involves bonding and GFCI protection requirements that go beyond a standard circuit installation. We cover the full electrical scope for each of these.
Running a high-draw appliance on a shared circuit is the most common reason a breaker trips repeatedly under normal use. The fix is a dedicated circuit sized for the load, not a larger breaker. We run load calculations, confirm panel capacity, and install the circuit correctly. For a kitchen renovation or a laundry room upgrade in a Beverly Hills home, getting the circuits right at the start prevents the problems that come from cutting corners.
The price depends on what the job actually involves. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the things that move the number. A panel upgrade that also requires a service entrance upgrade costs more than one that does not. A circuit run through a finished wall in a multi-story home involves more work than the same circuit run through an accessible garage.
We give you no-pressure estimates, priced up front. That means the price is confirmed before the visit is booked, and you know what it covers before anyone shows up. If the scope changes once the work is underway, the price is reset before we proceed. We do not add charges after the fact without telling you first.
Call (818) 369-3955 and ask about the job.
The rate is given on the phone, and you decide whether to proceed before anything is scheduled.
We serve Beverly Hills and the neighboring communities throughout Los Angeles County, including West Hollywood, Los Angeles, Culver City, Ladera Heights, and View Park-Windsor Hills. Residential and commercial calls are both covered, any hour of the day, any day of the week.
Whether the property is in Beverly Hills proper or in one of the surrounding communities, the process is the same: call, scope the job, confirm the price, and schedule the visit. No forms, no waiting for someone to call back.
We discuss the schedule on the call and confirm what the property's operating hours allow. For businesses that cannot have circuits interrupted during business hours, we can plan the work for early morning, evenings, or days the property is closed. The scope and timing are settled before anything is booked.
Electrical work for a hot tub or pool generally requires a permit and inspection in Los Angeles County, because the bonding, GFCI protection, and circuit requirements for water-adjacent installations are covered under specific code provisions. We confirm what applies to your property and address the permit requirements as part of the job, not as an afterthought. Ask about it when you call and we will walk through what the installation involves.
Knob-and-tube replacement involves removing the existing wiring from the circuits it serves and running new cable from the panel to each outlet, switch, and fixture. In a home where the wiring runs through finished walls, some access work is required to make the replacement practical. We assess what is accessible before the visit and walk through the scope on the call so you know what the job involves before anything starts.
We can match device styles, colors, and configurations to what is already installed in most cases. If you want a specific style or finish, let us know when you call and we can confirm whether it is available for the job. Matching is straightforward for standard outlet and switch styles.
We take calls and schedule work any hour of the day or night, including weekends and holidays. If a commercial job needs to happen outside normal business hours, we confirm the scope and access arrangements on the call and schedule accordingly. There is no separate category for after-hours work.
Discoloration or warmth at a faceplate points to a connection that has been arcing or overheating inside the box. That is a fire risk, not a cosmetic issue, and the outlet or switch should not be used again until it has been inspected and the cause identified. Call us as soon as you notice either sign.
Access is the property owner's or manager's responsibility to arrange. If access cannot be confirmed before the visit, we ask that you resolve that before we schedule. We can work with you on timing to make the visit as convenient as possible for the tenant, but we cannot proceed without access to the areas where the work needs to be done.
Electrical problems in Beverly Hills do not keep business hours, and neither do we. We are available around the clock, every day of the year.
Call (818) 369-3955 to reach us, get a price on the phone, and get the work scheduled.
We take the call, scope the job, and book the visit in one conversation. No forms, no waiting.
Also serving the towns around: West Hollywood, Santa Monica, Burbank, Inglewood, Sun Valley.
Every electrical job we take starts the same way: you call, we scope the work on the phone, and you get a price before anything is scheduled. The table below covers the services we offer across Beverly Hills and the San Fernando Valley, who each one is built for, and what is worth knowing before you book. If a service is not listed or you are not sure what your situation calls for, call us and we will tell you plainly what the job involves.
| Service Type | Scope of Work | Best For | What to Keep in Mind |
|---|---|---|---|
| Solar & Battery Backup | Wiring and panel integration for solarTransfer switch and interconnect installationPanel upgrade to handle added capacityUtility and inspection requirements confirmed | LA County homeowners planning for public-safety power shutoffs or grid outages | Grid reliability in LA County has made backup power a practical planning factor. We handle the electrical side of the system and make sure the interconnect meets utility and inspection requirements. |
| Whole-Home Surge Protection | Surge protector installed at the panelProtection for appliances and electronicsGrounding and bonding checkWhole-home and point-of-use options | Homes in dense urban grids where utility switching and nearby equipment cause voltage fluctuations | A single surge can damage wiring, appliances, and electronics throughout the house. Surge protection at the panel catches spikes before they reach the circuits. |
| Electrical Panel Upgrades | Panel replacement and service upgradesSubpanel installationLoad calculations before upgradePermit and inspection coordination | Homes adding major appliances, EV chargers, or solar, and properties with aging or undersized panels | Panel work in Los Angeles County requires a permit and inspection. We confirm what applies to your address and coordinate that process before the job is scheduled. |
Call (818) 369-3955 and we will scope the job on the phone, give you a price before anything is scheduled, and get the work done right.
(818) 369-3955