When something goes wrong with the power in a Pasadena home or building, the first thing that matters is a clear read of what is actually happening. The visit starts with a conversation: what the symptom is, where it showed up, and what was going on when it did. From that, the fault gets traced, the scope gets confirmed, and the price gets settled before any work begins. That is how every call runs, whether the job is a single dead outlet or a full panel replacement.
Pasadena carries a wide range of housing stock, from pre-war bungalows with original wiring to mid-century apartment buildings to newer construction, and the electrical work reflects that range. Property owners, landlords managing multi-unit buildings, and businesses running commercial spaces all call for the same core work: repairs, new circuits, panel upgrades, and safety inspections. We handle all of it, any hour of the day or night, every day of the week.
Scheduling a service call is simple, and the process is the same whether the job is urgent or planned. You describe what is happening, we ask the questions that help us understand the fault or the scope, and you get a price on the phone before anything is booked. Clear communication from the first call to the final test is how every job runs here. Nothing is scheduled until the price is confirmed and you have decided to proceed.
When someone arrives at the property, the first step is the same as the first step on the phone: understanding the situation before touching anything. That means checking the panel, testing the circuit, and confirming what the wiring behind the wall actually looks like before recommending a repair. Every circuit that gets worked on is tested live before the visit ends. Outlets get checked, breakers get confirmed under load, and the panel gets a final inspection before the cover goes back on. We treat your home and its wiring the way we would our own.
Older properties in Pasadena sometimes carry equipment that has not been manufactured in decades. A breaker for a panel that was discontinued years ago, a fuse holder that no longer has a direct replacement, a fixture designed around a lamp type that is no longer standard: these situations come up regularly in homes and buildings with original or partially updated wiring. When a part has to be sourced rather than swapped on the spot, that fact is part of the conversation before the visit ends.
Where a component is obsolete, the honest answer is usually one of two things: a compatible replacement that meets current code, or a targeted upgrade of the affected section so the repair does not depend on a part that cannot be found. We name the option and the cost before any work is done. If a part needs to be ordered, that is confirmed before the visit wraps up, not after the invoice arrives.
The price for any electrical job depends on what the job actually involves. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the things that move a quote. A straightforward outlet replacement on a healthy circuit is a different scope from the same outlet on a circuit with aging wiring and no ground. Both get a price before the work starts.
No-pressure estimates, priced up front, are how this works. You call, we scope the job on the phone, and you get the rate before anything is scheduled. If the scope changes once the work is underway, the price is reset before we proceed. Asking what a job costs is always the right move, and you get a straight answer. If you want to see the whole range first, try the page listing our electrical services.
Call (818) 369-3955 and the pricing conversation starts there.
We take calls any hour, any day, including weekends and holidays. For a fault that cannot wait, emergency calls are answered around the clock and we take short-notice work. For planned jobs, a phone call is all it takes to confirm what is available and get the visit on the calendar.
Pasadena has a substantial number of occupied rental units and operating businesses, and we understand that some properties cannot simply be shut down for a repair. When a tenant is in the unit or a business has to stay open, we work through what access is needed, what the disruption looks like, and how to keep it to a minimum. That conversation happens on the call, before the visit is booked.
We're one phone call from getting your power right.
Outdoor lighting in Pasadena gets year-round use in a way it does not in colder parts of the country. Security lighting, motion sensor fixtures, and landscape lighting all involve circuit work that needs to be done cleanly and weatherproofed properly. The placement matters as much as the fixture: a light that does not cover the right angle or reach the right distance is not doing the job it was installed for. We run the circuits, make the connections, and confirm the coverage before the visit ends.
Recessed lighting, LED conversions, pendant fixtures, and under-cabinet lighting all involve more than swapping a bulb. The wiring behind the ceiling or wall has to be in good shape, the box has to be rated for the fixture, and the circuit has to be able to carry the load. We check all of that before the fixture goes up. Where a room is being converted from older fixtures to recessed LED, the circuit work is part of the job, not an afterthought.
Two-prong outlets in an older home are a sign the wiring deserves a look. Ungrounded circuits, knob-and-tube wiring in the walls or attic, and aluminum branch-circuit wiring at device connections are all situations that come up in Pasadena's older housing stock. A full rewire addresses all of it. A partial rewire is the right call when the rest of the system is sound and only specific circuits need to be brought up. Either way, the scope is confirmed before the work begins and the job is permitted and inspected where required.
A whole-home surge protector installs at the main panel and catches voltage spikes before they reach the wiring and devices throughout the building. The inland valleys of the Los Angeles region see utility fluctuations from equipment cycling on large commercial circuits, and wildfire-season power shutoffs add their own stress to the grid when power is restored. Panel-level surge protection covers the entire property rather than just the outlets where individual strip protectors are plugged in. It is a straightforward installation and worth adding any time the panel is being serviced.
High-draw workshop equipment needs its own circuit. A welder, an air compressor, or a large table saw pulling from a shared household circuit will trip breakers under load and, over time, stress the wiring. A dedicated circuit sized to the equipment's actual draw fixes that cleanly. The job involves a load calculation, confirming panel capacity, and running the circuit to the right location in the garage or workshop. We confirm what the equipment requires before anything is wired.
Pasadena has a significant number of apartment buildings and condominium complexes, and electrical work in those properties has a different shape than a single-family home. The panel for an individual unit is often in a hallway, a utility closet, or a common area rather than inside the unit itself. Access to it sometimes requires coordination with building management.
Where part of the electrical service is shared, the line between what is inside the unit and what belongs to the building matters. Outlets, fixtures, switches, and the circuits feeding them from the unit panel are typically the resident's or owner's responsibility. The service entrance, the main distribution panel, and shared circuits are the building's side of that line. When a fault is on the building side, we tell you that on the call so the right conversation happens with the right party.
For condo owners and landlords managing units in multi-unit buildings, we work within whatever access constraints the property requires and communicate clearly about what the job involves and what it does not.
We take calls from across Pasadena and the neighboring communities throughout Los Angeles County, including Altadena, San Marino, South Pasadena, East Pasadena, and San Pasqual. Every one of those communities is covered the same way: any hour, any day, with the scope and price confirmed before the visit is booked.
Short-notice and urgent calls are handled the same way any other request is. If something needs attention right away, call and we will tell you what the schedule allows.
We discuss billing arrangements on the call. If you manage several properties and want a consistent process for quotes and invoices, let us know when you call and we will confirm how that works for your situation.
Two Level 2 chargers require two dedicated 240-volt circuits, and the panel needs capacity for both loads simultaneously. In some cases a load management system can allow two chargers to share a single circuit by limiting the draw of each based on what the other is using, but that depends on the charger hardware. We scope the installation for both chargers at once and confirm the panel situation before recommending an approach.
A hot tub typically needs a dedicated 240-volt circuit with a disconnect located within sight of the unit but outside the reach zone around the water. The circuit size depends on the equipment's amperage draw, and the installation requires GFCI protection and bonding. We confirm the panel has capacity for the load before running the circuit, and the work is permitted and inspected where required.
Wiring that does not meet current code is not automatically required to be replaced unless a permit or inspection triggers that requirement. We describe what we find, explain the risk associated with each item, and let you decide which items to address and in what order. Safety-critical findings get priority in that conversation.
Not always. In many cases wiring can be fished through existing walls and ceilings without opening them fully. The extent of any opening depends on the routing, the wall construction, and how the wiring needs to be run. We describe what access the job requires before the visit.
Homes built before the 1970s in this area frequently have ungrounded two-prong outlets, knob-and-tube wiring in the walls or attic, and panels that were sized for a fraction of the electrical load a modern household carries. Aluminum branch-circuit wiring is also common in homes built during a specific window in the 1960s and 1970s and requires specific handling at device connections. An electrical safety inspection is the most reliable way to understand what a property has and what it needs.
Yes. Running a cable underground to a detached garage, workshop, or other outbuilding is a standard job. The cable type and burial depth depend on the method used, whether direct burial cable or conduit, and local code requirements. We confirm what applies before the trench is dug and handle the circuit from the panel to the outbuilding.
Yes. Multi-unit residential buildings, commercial spaces, and mixed-use properties all generate electrical work that falls within what we handle: panel work, circuit installation, outlet and lighting upgrades, and safety inspections. Access requirements and shared-service considerations for those properties are part of the conversation when you call, so the visit is planned around what the building actually requires.
We tell you if a permit is needed. We name the fault plainly. You decide the fix.
That is the job, whether it is a flickering light in a Pasadena bungalow, a panel that needs to be replaced before a renovation, or a dedicated circuit for an EV charger in a garage.
Call Northridge Electrical Company at (818) 369-3955 for a quote.
The price is confirmed before anything is scheduled, and the work does not end until everything is tested.
We take electrical work in these nearby communities as well: Glendale, Burbank, West Hollywood.
Every electrical job we take starts the same way: you call, we scope the work on the phone, and you get a price before anything is scheduled. The table below covers the services we offer across Pasadena and the San Fernando Valley, who each one is built for, and what is worth knowing before you book. If a service is not listed or you are not sure what your situation calls for, call us and we will tell you plainly what the job involves.
| Service Type | Scope of Work | Best For | What to Keep in Mind |
|---|---|---|---|
| Hot-Tub Circuits | Dedicated 240V circuit from panelGFCI protection at disconnectBonding for water-adjacent equipmentPermit and inspection coordination | Homeowners installing or relocating a hot tub or spa in Los Angeles County | Hot-tub wiring involves bonding requirements and GFCI protection specific to proximity to water. We handle the full electrical scope, from the panel to the equipment pad. |
| EV Charger Installation | Level 2 charger circuit and wiringPanel capacity check before installHardwired or outlet-based charger hookupPermit coordination where required | Pasadena homeowners and businesses adding EV charging at home or at a parking facility | A Level 2 charger needs a dedicated 240V circuit. We check what the panel can support before recommending whether to run the circuit as-is or upgrade the service first. |
| Electrical Panel Upgrades | Panel replacement and service upgradesSubpanel installationLoad calculations before upgradePermit and inspection coordination | Homes adding major appliances, EV chargers, or solar, and properties with aging or undersized panels | Panel work in Los Angeles County requires a permit and inspection. We confirm what applies to your address and coordinate that process before the job is scheduled. |
Call (818) 369-3955 and we will scope the job on the phone, give you a price before anything is scheduled, and get the work done right.
(818) 369-3955