Something stopped working. That is how most calls start, not with a named job or a part number, but with a light that will not come on, an outlet that went dead, or a breaker that keeps tripping no matter how many times it gets reset. Working out what is actually wrong is part of what we do, and it happens before any work is proposed. A city of Glendale's size generates a wide range of those calls: apartment buildings where a single circuit failure affects multiple units, older single-family homes with wiring that has been added to over the decades, and commercial properties where a fault means downtime.
We cover all of it. We take calls from Glendale any hour of the day, any day of the week, and the process starts the same way every time: you describe what you are seeing, we ask the right questions, and you get a clear picture of the job and the price before anything is scheduled.
A three-way switch controls a single light from two locations, and a four-way switch adds a third. When one of those stops working, the whole arrangement goes dark, and the fault could be in any of the switches or in the wiring between them. We trace which switch has failed before replacing anything, because swapping the wrong one leaves the problem exactly where it started.
A detached garage or a workshop that needs real power, not just a single outlet on a long extension cord, typically calls for a subpanel. The subpanel feeds from the main panel, carries its own breakers, and gives the outbuilding dedicated circuits for whatever runs there. The main panel has to have capacity for the added load, and the feeder cable has to be sized correctly for the run. We work through both before the job is quoted.
A panel where half the breakers are labeled "misc" or left blank is a problem waiting to happen. Identifying which breaker controls which circuit takes methodical work, and it matters most when a fault needs to be isolated quickly or when a renovation is being planned. We label panels clearly and accurately, and we document what is there so the next person who opens the box knows what they are looking at.
A standard outlet replacement is a straightforward job when the wiring behind the wall is in good condition. Adding an outlet to a room that does not have one where it is needed, or swapping a two-prong ungrounded receptacle for a properly grounded three-prong outlet, involves more. Two-prong outlets in an older home are a sign the wiring deserves a look before a new device goes in. GFCI and AFCI protection requirements depend on where in the home the outlet sits, and we confirm what applies before the work starts.
Beyond outlets and switches, we handle dedicated appliance circuits, ceiling fan installation, EV charger circuits, and electrical panel upgrades. Electrical safety inspections are a natural starting point when the history of a property's wiring is unclear, and we conduct them for homeowners, landlords, and buyers who want to know what they are getting into before closing.
Scheduling a service call is simple. You call, we ask about the situation, and we confirm what is available. For planned work, calling ahead gives us time to scope the job properly on the phone and have everything lined up before the visit. For something that cannot wait, we take urgent calls any hour, including nights, weekends, and holidays. There are no after-hours restrictions because there are no closed hours.
Glendale has a significant share of occupied rental units and commercial properties where a fault cannot simply be left until a convenient time. A building manager dealing with a tripped breaker affecting multiple tenants, or a business that cannot shut down for a repair, gets the same response as a homeowner: a call answered by someone who knows the trade, a price confirmed before the visit is booked, and work that gets done without unnecessary disruption. We work around what the property requires.
We tell you if a permit is needed. We name the fault plainly. You decide the fix.
Electrical pricing depends on what the job actually involves, and that is determined on the call and confirmed during the visit. The fault itself, what has to be opened up to reach it, and whether the existing circuit or panel can carry a proposed change are the things that move the number. A panel upgrade that also requires a service-entrance upgrade costs more than one that does not. An EV charger circuit on a panel with available capacity is a different job from the same circuit on a panel that needs to be upgraded first.
When you call, we ask about the symptom or the scope, and we give you the rate on the phone before anything is booked. The price is confirmed before we schedule, and you know what it covers. No-pressure estimates, priced up front, is how every job runs here. There is no obligation to proceed, and there is no pressure to add work that was not part of the original call.
Getting your power back is easier than you think.
Call (818) 369-3955 and the quote happens on the call.
Some jobs are straightforward to access. Others are not, and that affects how the work is planned. Attic wiring runs, crawl space circuits, and wiring above high ceilings all involve working in spaces that require more time and more care than an open wall. Tall ceilings in older Glendale homes, whether in a craftsman bungalow or a mid-century apartment building, sometimes mean that a simple fixture replacement turns into a job that needs proper staging to do safely.
We plan for access before the visit, not after arriving on site. When a job involves a space that is difficult to reach, we confirm what it requires on the call so the visit is set up correctly from the start. That includes knowing whether the attic or crawl space is accessible, what the clearances are, and whether any of the work will require cutting into a wall or ceiling to reach the wiring behind it.
Electrical work that changes the wiring, adds circuits, or upgrades the panel generally requires a permit in Los Angeles County. The permit triggers an inspection, and the inspection confirms the work meets current code before the wall is closed or the panel cover goes back on. We confirm what is required for the specific job before anything is scheduled, and we handle the filing where it applies.
The timing matters. A permit has to be in place before the work starts, and the inspection has to happen before the job is considered complete. For a planned renovation or a panel upgrade, that timeline is part of the scheduling conversation. For urgent repairs, we work through what is required and keep the process moving. Clear communication from the first call to the final test is how every job runs, and that includes the permit and inspection steps. The parts people usually ask about are covered on our services page for electrical work.
When power is out or behaving strangely, the first question is where the fault sits. Problems on the utility side of the meter, including issues with the service drop, the transformer, or the lines feeding the property, are the utility's responsibility to repair. Problems on the customer side, from the meter base through the service entrance conductors, the main panel, and everything beyond it, are ours.
We work through that distinction on the call and during the diagnostic visit. If the fault turns out to be on the utility's side, we tell you clearly and explain what to report and to whom. If it is on our side, we scope the repair and give you a price. A service-entrance or meter-base problem sometimes involves coordination between the utility and an electrician, and we handle our part of that without leaving you to figure out who does what.
We cover Glendale and the surrounding area across Los Angeles County, including La Canada Flintridge, La Crescenta-Montrose, Burbank, Pasadena, and Altadena. Whether the property is in Glendale proper or in one of the neighboring communities, the call is answered the same way and the work runs the same process.
We're one phone call from getting your power right.
Yes. If a household member depends on electrically powered medical equipment, we need to know that before the visit so we can plan the outage sequence carefully and minimize the time that circuit is without power. In some cases we can isolate the work to circuits that do not affect the medical equipment at all. Tell us when you call and we will plan accordingly.
Yes. Multi-unit properties generate a specific set of electrical needs: circuit faults that affect more than one unit, panel work in common areas, outlet and switch replacements during tenant turnovers, and dedicated circuits for laundry or kitchen equipment. We work around occupied units and schedule the visit to minimize disruption to tenants and building operations.
Call (818) 369-3955 to describe the property and the fault, and we will confirm what the job involves before anything is booked.
We work room by room or section by section, restoring power to each area before moving to the next. The panel work and the final connections happen at the end of the sequence. At no point is the entire property without power for an extended period unless the job specifically requires it, and we confirm the staging plan before the work begins.
We work with what is accessible and describe the options for reaching the buried section if it needs to be replaced or extended. In some cases the wiring can be rerouted around the inaccessible section. In others, limited opening of the wall or floor is necessary. We confirm what the job requires before any cutting begins.
If the direct route is blocked by a driveway, a paved surface, or another obstruction, we look at alternative routing options, including conduit run above grade where permitted, or boring under the obstruction rather than cutting through it. We describe the options and their implications before the work begins.
An empty property is often easier to work in because access is straightforward and there is no need to work around occupants or their schedules. We confirm the access arrangements on the call, including who will be present to provide entry, and schedule the work accordingly. A vacant property does not change the scope of the job itself.
Homes built before the 1980s in Glendale often have ungrounded two-prong outlets, wiring that was added to over the decades without consistent documentation, and panels that were sized for a different era of electrical demand. Aluminum branch-circuit wiring shows up in homes from the late 1960s and 1970s, and it requires specific handling at device connections to remain safe. An electrical safety inspection gives a clear picture of what is there and what it needs before any repair work is proposed.
From a dead outlet to a full panel upgrade, we handle the electrical work that homes and properties in Glendale need, any hour, any day. La Canada Flintridge, Burbank, Pasadena, and the rest of the surrounding area are covered too.
Call (818) 369-3955 and Northridge Electrical Company will scope the job, confirm the price, and get it on the schedule.
Not the biggest name in town. Just the one that answers. No runaround.
Wiring and panel work nearby: Burbank, Pasadena, Sun Valley, West Hollywood, Beverly Hills.
Every electrical job we take starts the same way: you call, we scope the work on the phone, and you get a price before anything is scheduled. The table below covers the services we offer across Glendale and the San Fernando Valley, who each one is built for, and what is worth knowing before you book. If a service is not listed or you are not sure what your situation calls for, call us and we will tell you plainly what the job involves.
| Service Type | Scope of Work | Best For | What to Keep in Mind |
|---|---|---|---|
| Electrical Repairs & Troubleshooting | Flickering lights and dead outletsTripping breakers and blown fusesBurning smells and sparking receptaclesFault tracing before any part is replaced | Any home or business with a symptom that needs a diagnosis first | The fault is traced before anything is replaced, which keeps the repair scoped to what the job actually needs. |
| Hot-Tub Circuits | Dedicated 240V circuit from panelGFCI protection at disconnectBonding for water-adjacent equipmentPermit and inspection coordination | Homeowners installing or relocating a hot tub or spa in Los Angeles County | Hot-tub wiring involves bonding requirements and GFCI protection specific to proximity to water. We handle the full electrical scope, from the panel to the equipment pad. |
| Electrical Panel Upgrades | Panel replacement and service upgradesSubpanel installationLoad calculations before upgradePermit and inspection coordination | Homes adding major appliances, EV chargers, or solar, and properties with aging or undersized panels | Panel work in Los Angeles County requires a permit and inspection. We confirm what applies to your address and coordinate that process before the job is scheduled. |
Call (818) 369-3955 and we will scope the job on the phone, give you a price before anything is scheduled, and get the work done right.
(818) 369-3955